FIRE SHUTTERS

Industrial Door Service Limited offers probably the most comprehensive range of traditional fire resisting shutters available on the market today. Products which satisfy the needs of every application.

All Industrial Door Services Limited fire doors and shutters are tested and assessed by officially recognised and competent authorities. Industrial Door services fire resisting rolling shutters are designed for fire protection with durability and reliability. The Fire Door range is suitable for various installations including department stores, shopping centres, warehouses, factories and car parks. This door has been tested to BS476 Part 22 1987 with LPCB approval and certification for up to four hours' fire protection.

STANDARD SPECIFICATION

Curtain

Shutter curtains are constructed from continuously interlocked 76mm curved section steel laths, which are securely held in place by cast steel end locks. Lath thickness vary from 0.7mm to 1.2mm dependent upon opening size. Bottom rails are galvanised and roll-formed into a Tee section.

Guides

Channel section galvanised mild steel guides with slotted fixings for expansion in a fire are fixed to the jambs with continuous steel angles.

Endplates

Prime painted mild steel of appropriate thickness relative to door size.

Finish

The Roller Shutter Fire Door is supplied with the majority of parts galvanised as standard. Where non-galvanised parts are utilised these are finished with one coat of primer paint. Powder coated options are available with a chose of colours from our standard RAL/BS colour range.

Operation

A choice of either manual operation, single or 3 phase electric operators are available. Fire shutters can ve manufacrtured with basic automatic closing from fusable link to being fully integrated into fire detection systems with automotic re-set solenoids and where required audio visual warning systems and adjustable timer displays. Full battery back up is availaible.

Technical Drawings